Automatic Cold Tire Refinery Vulcanization Autoclave Tank For Rubber Shoes Hose

Automatic Control Cold Tire Refinery Rubber Shoes Rubber Hose Vulcanization Autoclave Tank

The main technical introduction:
1. Plus Heat And Heat Robin Ring
Direct steam heating: the steam into the steam from the tank bottom, the inlet is arranged on the bottom of the tank, the inlet is controlled by automatic valves. Vapor diffusion tubes are arranged vertically in the tank bottom, the diffusion tube steam holes according to certain rules and tilt angle are arranged densely, ensure that the steam into the uniform temperature in the tank after the spread to the surrounding, to prevent uneven heating, uniform temperature in the tank is not dead. Set the working procedure, the control system automatically boost, heating, insulation, vulcanization, relief work, after work, automatically close the valve and send out sound and light alarm tone. Autoclave temperature uniformity, constant pressure, the tank products due to temperature and pressure caused by uneven, product quality is not the same.

2. Fast Open The door
Manual fast open door, open the door can realize rotation handwheel tank door open or closed, the operation steps of single can easily complete the switch door. This design is the most advanced open style and philosophy. Never deformation, safe use and quick, simple operation, high efficiency and worry. When the power can be a normal switch tank door

3. Tank The door Double ANN All Even the Lock
The tank door with double safety interlock to prevent equipment with pressure at work, no safety accident workers mistakenly opening door caused. Completely solve the safety problems caused by the misoperation of the workers and other reasons. The design of equipment 2 sets of safety interlocking device in the tank door, detailed as follows: (1), automatic pressure safety interlocking device: when the tank pressure reaches 0.01Mpa, pressure suspension safety chain automatically locked tank door. As long as the tank pressure cannot open the tank door, prevent security risk caused by the misoperation of the workers. (2), a manual safety interlocking device: only close manual linkage valve work, the tank can charge pressure boost heating, otherwise unable to form a pressure tank. The door must first open the manual chain, otherwise it can not open the tank door. Ensure that the tank door only in without pressure to open the tank door, as long as the pressure inside the tank, even the misoperation of the workers can not open the tank door, completely solve the hidden trouble of safety workers misoperation.

4. Temperature
The external thermal insulation: galvanized plate welded on the tank (around 10 years without rusting), built-in double layer heat insulation cotton. Can use external insulation, heat preservation and heat insulation cotton in the middle head, with a fixed bolt fixing insulation cotton. To ensure that the tank heat is not volatile full utilization of heat energy, reducing energy consumption, saving the use cost. The tank insulation effect is good, long time use of non deformation, convenient transportation.

5. Load Matter
Tank two rails, using 12 GB, rail steel. The bearing capacity is big, long service life, safety and convenience.

6. Safety
Six layers of safety protection device: ultra high pressure automatic alarm, automatic control of the pressure relief valve, safety valve, manual pressure relief valve, automatic pressure safety interlock, manual safety interlocking six heavy security protection system, is the most safe pressure vessels. The security problems of the maximum resolution of the user.